Panasonic KX-TDA5450 Installation Manual

Also see for KX-TDA5450: Installation manual

Contents

Panasonic KX-TDA5450 Installation Manual Manual pdf 15 page image

2.1.2 Installing the SIP-GW4 Card in the PBXInstall the SIP-GW4 card in slot 05, 06, or 07 of the PBX.1. Before installing the card, cut and remove the dummy cover plate for the appropriate slot from the mainunit.Dummy Cover PlateCAUTIONFor safety reasons, smooth the cut edges after removing the dummy cover plate.2. Position the card in the open slot, making sure that the tabs on both sides of the card fit into place. Then,holding the card firmly in place, lower the rear end so that the hole of the card fits over the extension bolt.12Extension BoltDocument Version 2008-10 Installation Manual 152.1.2 Installing the SIP-GW4 Card in the PBX