Panasonic KX-TDA5450 Installation Manual

Also see for KX-TDA5450: Installation manual

Contents

Panasonic KX-TDA5450 Installation Manual Manual pdf 53 page image

3.5.2 Static Route1. Click 1.3.2 Static Route in the operation menu.• Current Active Route List: Current active routing lists are displayed. "link#1" indicates the LAN portof the card, and "link#2" indicates the WAN port of the card.• Route Configuration Table: Available routing lists are displayed. If there is a route displayed in thetable, clicking the Delete button will delete the route from both Current Active Route List and RouteConfiguration Table.• Add a Route: Additional routes can be specified.2. Assign each parameter referring to the descriptions below.Parameter & Description Default Value RangeDestination IP AddressSpecifies the destination IP address.No default Available IP addresses (defaultroute: 0.0.0.0)Destination Subnet MaskSpecifies the destination subnet mask address.24 (255.255.255.0) 0, 8–32Next HopSpecifies a gateway by selecting either an IPaddress or Interface.No default Available IP addresses,PPPoE3. Click Add.A confirmation screen is displayed.The new route specified in Add a Route is added to Route Configuration Table. If the network isconnected, the route is also added to Current Active Route List. If not, the route will be queued and addedwhen the network is connected.Document Version 2008-10 Installation Manual 533.5.2 Static Route