4.17 [2-8-3] Ring Tone Patterns—Call from OthersDifferent ring tone patterns can be selected for incoming intercom calls and ringing triggered by certain PBXfeatures (Timed Reminder, Call Back, and Live Call Screening). A maximum of 8 Ring Tone Pattern Tablescan be programmed, and any pattern table can be selected for use by an extension.For more information on ring tone patterns, see "1.1.3.2 Ring Tone Pattern Selection" in the Feature Guide.Extension—Ring Tone Pattern Plan 1–8Specifies the ring tone pattern for incoming intercom calls.Value RangeSingle, Double, Triple, Option 1, Option 2Maintenance Console Location4.17 [2-8-3] Ring Tone Patterns—Call from OthersProgramming Manual References6.1 [4-1-1] Wired Extension—Extension Settings—Option 1— Ring Pattern Table6.10 [4-2-1] Portable Station—Extension Settings—Option 1— Ring Pattern TableFeature Guide ReferencesNoneTimed Reminder—Ring Tone Pattern Plan 1–8Specifies the ring tone pattern for Timed Reminder alarms.Value RangeSingle, Double, Triple, Option 1, Option 2Maintenance Console Location4.17 [2-8-3] Ring Tone Patterns—Call from OthersProgramming Manual References6.1 [4-1-1] Wired Extension—Extension Settings—Option 1— Ring Pattern Table6.10 [4-2-1] Portable Station—Extension Settings—Option 1— Ring Pattern TableFeature Guide ReferencesNoneCall Back—Ring Tone Pattern Plan 1–8Specifies the ring tone pattern for callback ringing by Automatic Callback Busy.548 PC Programming Manual4.17 [2-8-3] Ring Tone Patterns—Call from Others
