2.6.15 Utility—CS InformationDisplays information stored by the PBX regarding each Cell Station (CS).This option is only available at Installer level, and requires that the target CSIF, DHLC, DLC, or V-IPCS4 cardbe set to INS status.The displayed items are as follows:Item DescriptionSlot Number of the slot (for KX-TDE600, shelf and slot)Port Number of the portCS Name Name of the attached CSStatus Service status of the attached CS: INS, OUS, or FAULT.If the status is FAULT, subsequent data items for that port will be leftblank.Version Version number of the programme file stored in the CSRevision Revision number of the programme file stored in the CSCSID 12-digit ID number of the CSPath Number of the wireless extension currently using each path. In the caseof a group, several extensions may be using the same floating extensionnumber.When an extension number is not registered, the display shows"OFF". 2.4 GHz PSs can use up to 3 paths. DECT PSs can use up to4 paths. When using high-density CSs or IP-CSs, DECT PSs can useup to 8 paths.Group Call Number of PSs registered to the attached CS that are members of a PSRing Group.To view CS information1. From the Utility menu, select CS Information.2. From the Target CSI/F Slot No drop-down list, select the target slot.• To display information on a single card, select the slot number and name of that card.• To display information on all matching cards, select "All".3. From the Interval Timer drop-down list, select the number of seconds between each automatic screenrefresh.4. Click Start to begin monitoring.Monitoring will be performed and the screen will refresh according to the interval specified.To refresh the screen manually at any time, click Refresh.5. Click Stop to end monitoring.6. Select an option:• Click Capture if you want to save the displayed information.1. Enter a file name, or select a file to overwrite.2. Click Start.• Click Close to return to the main screen.PC Programming Manual 852.6.15 Utility—CS Information
