Panasonic KX-TG1810NZ Operating Instructions Manual

Panasonic KX-TG1810NZ Operating Instructions Manual Manual pdf 25 page image

Base Unit Settings25Ringer setupRinger volume1 Press {j/OK}.2 Select “Base Unit Setup”, thenpress {>}.3 Enter “0000” (default base unit PIN).L If you changed the PIN, enter it (page28).4 Select “Ringer Setup”, then press{>}.5 Select “Ringer Volume”, then press{>}.6 Press {e} or {v} repeatedly to selectthe desired volume.7 Press {>}.8 Press {ih}.Night modeNight mode allows you to select a block oftime during which the base unit will not ringfor outside calls. This feature is useful fortimes when you do not want to be disturbed,for example, while sleeping. Night mode canbe set independently for the handset (page20) and the base unit.Set the date and time beforehand (page 10).Setting the start and end time for nightmode1 Press {j/OK}.2 Select “Base Unit Setup”, thenpress {>}.3 Enter “0000” (default base unit PIN).L If you changed the PIN, enter it (page28).4 Select “Ringer Setup”, then press{>}.5 Select “Night Mode”, then press {>}.6 Select “Start/End”, then press {>}.7 Enter the desired hour and minute youwish to start this feature by selecting 2digits for each.L If you use 12-hour time entry, select“AM” or “PM” by pressing {*}repeatedly before entering the time.8 Enter the desired hour and minute youwish to end this feature by selecting 2digits for each.L If you use 12-hour time entry, select“AM” or “PM” by pressing {*}repeatedly before entering the time.9 Press {j/OK}.10 Press {ih}.Turning night mode on/off1 Press {j/OK}.2 Select “Base Unit Setup”, thenpress {>}.3 Enter “0000” (default base unit PIN).L If you changed the PIN, enter it (page28).4 Select “Ringer Setup”, then press{>}.5 Select “Night Mode”, then press {>}.6 Select “On/Off”, then press {>}.7 Select “On” or “Off”, then press {>}.8 Press {ih}.Setting the ring delay for night modeThis setting allows the base unit to ringduring night mode if the caller waits longenough. After the selected amount of timepasses, the base unit will ring, useful whensomeone urgently needs to speak with you.If you select “No Ringing”, the base unitwill not ring during night mode.1 Press {j/OK}.2 Select “Base Unit Setup”, thenpress {>}.