Panasonic KX-TG1850ALT Operating Instructions Manual

Making/Answering Calls17R button (to use the recall feature){R} is used to access optional telephoneservices. Contact your service provider fordetails.Note:L If your unit is connected to a PBX (privatebranch exchange), pressing {R} can allowyou to access certain features of your hostPBX such as transferring an extensioncall. Consult your PBX dealer for details.L You can change the recall time (page 29).L Users in Australia can access Telstra’s“EASY CALL” service by having the recalltime set at 100 msec. (default setting, seepage 27), and then follow Telstra’s “EASYCALL” instructions to operate this service.Pause button (for PBX/long distanceservice users)A pause is sometimes required whenmaking calls using a PBX or long distanceservice.Example: If you have to dial {0} beforedialling outside numbers manually, you willprobably pause after dialling {0} until youhear a dial tone.1 Press {0}.2 Press s (right soft key).3 Dial the phone number, then press {C}or {s}.Note:L Pressing s 1 time creates 1 pause.Press s repeatedly to create longerpauses. To change pause length, seepage 29.Answering calls1 Lift the handset and press {C} or {s}when the unit rings.L You can also answer a call by pressingany dial key from {0} to {9}, {*}, {#},or {INT}. (Any key answer feature)2 When finished talking, press {ih} orplace the handset on the base unit.Auto talk featureYou can answer calls simply by lifting thehandset off the base unit. You do not need topress {C}. To turn this feature on, seepage 25.To adjust the ringer volume when anoutside call comes inPress {e} or {v} when an outside callcomes in.Note:L The ringer volume cannot be adjusted ifthe handset is on the base unit.Other featuresHandset locatorUsing this feature, you can locate thehandset if it has been misplaced.1 Press {x} on the base unit.L The base unit will page the handsetfor about 1 minute.2 To stop paging, press {x} on the baseunit or press {ih} on the handset.TG1850AL(e).book Page 17 Monday, December 6, 2004 9:10 PM