Panasonic KX-TG1850ALT Operating Instructions Manual

Base Unit Settings30list to the phone number “123-456-7890”,the unit dials “456-7890”.1 Press $ (middle soft key).2 Select Z, then press ,.3 Enter “0000” (default base unit PIN).L If you changed the PIN, enter it (page30).4 Select “Call Options”, then press,.5 Select “ARS Settings”, then press,.6 Select “Area Code”, then press ,.7 Select an area code location (1-4), thenpress ,.L If the location already contains anarea code, the code is displayed.8 Enter an area code (5 digits max.), thenpress ,.9 Press {ih}.Setting call restrictionYou can restrict selected handsets fromdialling certain numbers. You can assign upto 6 phone numbers to be restricted, andselect which handsets will be restricted.Storing area codes here will prevent therestricted handsets from dialling any phonenumber in that area code. If a restrictednumber is dialled, the call will not beconnected and the restricted number willflash on the display.1 Press $ (middle soft key).2 Select Z, then press ,.3 Enter “0000” (default base unit PIN).L If you changed the PIN, enter it (page30).4 Select “Call Options”, then press,.5 Select “Call Restrict”, then press,.6 Set which handsets will be restricted bypressing the desired handset number.L All the registered handset numberswill be displayed.L Flashing numbers indicate callrestriction is turned on for thecorresponding handset.L To turn call restriction off for a handset,press the number again. The numberwill stop flashing.7 Press ,.8 Select a memory location, then press,.L If the memory location alreadycontains a restricted number, thenumber is displayed.9 Enter the phone number or area code tobe restricted (8 digits max.), then press,.L To erase a restricted number, press{C/T}.10 Press {ih}.Other optionsChanging the base unit PIN(Personal Identification Number)For security, the base unit PIN must beentered when changing certain settings. Thedefault PIN is “0000”.Important:L If you change the PIN, please make noteof your new PIN. The unit will not revealthe PIN to you. If you forget your PIN,consult your nearest Panasonic servicecentre.1 Press $ (middle soft key).2 Select Z, then press ,.3 Enter “0000” (default base unit PIN).L If you changed the PIN, enter it.TG1850AL(e).book Page 30 Monday, December 6, 2004 9:10 PM