Panasonic KX-TG1851NZ Operating Instructions Manual

Panasonic KX-TG1851NZ Operating Instructions Manual Manual pdf 14 page image

Making/Answering Calls14Making calls1 Lift the handset and dial the phonenumber.L To correct a digit, press {C/T}.2 {C}3 When finished talking, press {ih}or place the handset on the baseunit or charger.Speakerphone1 During a conversation, press {s} toturn on the speakerphone.L Speak alternately with the caller.2 When finished talking, press{ih}.Note:L For best performance, use thespeakerphone in a quiet environment.L To switch back to the receiver, press{C}.Adjusting the receiver or speakervolumePress {^} or {V} while on a call.Making a call using the rediallistThe last 10 phone numbers dialled arestored in the redial list (each 24 digitsmax.).1 {R}2 {^}/{V}: Select the desired number.3 {C}Erasing numbers in the redial list1 {R}2 {^}/{V}: Select the desired number.i {>}3 {^}/{V}: “Erase” i {>}4 {^}/{V}: “Yes” i {>} i {ih}Pause (for PBX/long distanceservice users)A pause is sometimes required whenmaking calls using a PBX or longdistance service.Example: If you have to dial {0} beforedialling outside numbers manually, youwill probably need to pause after dialling{0} until you hear a dial tone.1 {0} i {R}2 Dial the phone number. i {C}Note:L A 3 second pause is inserted eachtime {R} is pressed. Repeat asneeded to create longer pauses.Answering calls1 Lift the handset and press {C} or{s} when the unit rings.L You can also answer the call bypressing any dial key from {0} to{9}, {*}, or {#}. (Any keyanswer feature)2 When finished talking, press {ih}or place the handset on the baseunit or charger.Auto talk featureYou can answer calls simply by lifting thehandset off the base unit or charger. Youdo not need to press {C}. To turn thisfeature on, see page 18.Adjusting the handset ringer volumewhen receiving a callPress {^} or {V}.