Panasonic KX-TG2214F Operating Instructions Manual

Also see for KX-TG2214W: Description

Contents

Panasonic KX-TG2214F Operating Instructions Manual Manual pdf 31 page image

Voice Mail ServiceAdvanced Operation31For assistance, please call: 1-800-211-PANA(7262)Setting Voice Mail (VM) Tone DetectionYour telephone company sends special signals (Voice mail tones) to activate theVM indicator.Press [ ] or [ ] to listen to the dial tone. If you hear a pulsating tone followed bya continuous dial tone, this is an indication that a new message was recorded.Your phone comes set to detect these tones (set to ON). After you hang up or thephone stops ringing, your unit will seize the phone line and check if a message hasbeen recorded. If a new message was recorded at your telephone company,“Voice Mail” will be displayed on the handset and the VM indicator on the baseunit will flash.Set this programming to OFF when:— you do not subscribe to a voice mail service,— your telephone company does not send a pulsating tone, followed by acontinuous dial tone, or— your unit is connected to a business or office telephone system (PBX).If you are not sure which setting is required, consult your local telephone companyor contact the Panasonic Customer Call Center.1 Press [MENU].2 Scroll to “Initial setting” by pressing [ ]or [ ], then press Select.3 Scroll to “Voice Mail” by pressing [ ] or[ ], then press Select.4 Scroll to “VM tone detect” by pressing [ ]or [ ], then press Select.5 Select “Off” or “On” by pressing [ ] or [ ].6 Press Save, then press [OFF].>> Initial settingExit Select>>>> Voice MailBack Select>>>> VM tone detectBack Select>>>> VM tone detect:OnBack Save>>