Panasonic KX-TG2219B Operating Instructions Manual

Also see for KX-TG2219B: Description

Contents

361 Press (FUNCTION).2 Press á at “Save directory”.•The display shows the number of stored itemsin the directory.3 Enter a name, up to 15 characters with thedialing buttons, Ü or á.•See the steps for entering names and symbols(p. 37).•If a name is not required, press Ö (Next key)and go to step 5.4 Press Ö (Next key).5 Enter a phone number, up to 22 digits.•Each time you press (HOLD/CLEAR), a digit iserased. To erase all of the digits, press andhold (HOLD/CLEAR).6 Press Ö (Next key).•If you want to change the storing name ornumber, press Ñ (Edit key) repeatedly toreach the desired display and change it.7 Press á (Save key).•A beep sounds.•To continue storing other items, repeat from step 2.•To exit the programming mode, press (OFF).•If a pause is required for dialing, (REDIAL/PAUSE) can be stored in a phonenumber counting as one digit (p. 47) in step 5.•You can exit the programming mode any time by pressing (OFF).•If the display shows “Directory full” in step 2, the display will return to step1, press (OFF) to exit the programming mode. To erase other stored items fromthe directory, see page 42.•If an alarm tone sounds in step 7, the item cannot be stored in the directory.Place the handset on the base unit and try again from step 1.--------------HSave directoryRinger volumeEnter nameTom JonesIH G=NextDirectory=20 itemsEnter nameIH G=NextEnter phone no.0987654321IH G=NextTom Jones098-765-4321F=Edit H=SaveTom Jones098-765-4321Directory