Panasonic KX-TG2224F Operating Instructions Manual

Contents

45For assistance, please call: 1-800-211-PANA(7262)Answering SystemRemote Operation from a Touch Tone PhoneYou can operate the Answering System from any touch tone phone.A synthesized voice menu will guide you through the Answering System (p. 46).• To skip the voice menu and operate the unit directly, see page 47.Summary of remote operationRemote CodeThe remote code prevents unauthorized people from accessing your unit andlistening to your messages. Choose any 2-digit number (00–99) for your remotecode.The factory preset remote code is “11”. If you do not program your own remotecode, you can use “11”.To check the remote code, repeat steps 1 to 4.• The remote code is displayed. When finished, press [OFF].Call your unit from a touch tone phone.• The unit will announce theremaining recording timeafter playback, if it is lessthan 3 minutes.• The messages are saved.Enter your remote code (see below) during orafter the greeting message.• The number of new messages is heard.After 3 seconds, the voice menu will start(p. 46).Follow the menu or enter the direct commands(p. 47).To end remote operation, hang up.1 Press [MENU].2 Scroll to “Initial setting” by pressing [ ]or [ ], then press Select.3 Scroll to “Set answering” by pressing [ ] or[ ], then press Select.4 Scroll to “Remote code” by pressing [ ] or[ ], then press Select.5 Enter a 2-digit remote code (00–99).6 Press Save, then press [OFF].Handset>> Initial settingExit Select>>>> Set answeringBack Select>>>> Remote codeBack Select>>Remote code :11Back Save