22Making CallsUsing the HandsetTo have a hands-free phone conversation• If the handset has lost communication with the base unit, the handset beeps3 times and “No link to base. Place on cradle and try again.” isdisplayed.• If [ ], [ ] or any other buttons except [MUTE] and [OFF] is pressed while thehandset is on the base unit, the handset beeps 3 times and “Please lift upand try again.” is displayed. Lift the handset and press the button again.1 Press [ ].• “Talk” is displayed.2 Dial a phone number.• The dialed number is displayed.• After a few seconds, the display willshow the length of the call.3 To hang up, press [OFF] or placethe handset on the base unit.1 Press [ ].• “SP-phone” is displayed.2 Dial a phone number.• The dialed number is displayed.• After a few seconds, the display will show the length of the call.3 When the other party answers, talk into the microphone.4 To hang up, press [OFF] or place the handset on the base unit.Hands-free Digital Duplex SpeakerphoneFor best performance, please note the following:• Talk alternately with the other party in a quiet room.• If you or the other party has hearing difficulty, press [ ] to decrease thespeaker volume.• While talking using [ ], you can switch to the hands-free phone conversationby pressing [ ]. To switch back to the receiver, press [ ].HandsetDisplay[ ], [ ]>>[ ][ ][REDIAL]Microphone[OFF]SoftKeys>