Panasonic KX-TG2343C Operating Instructions Manual

Contents

Preparation19Programmable SettingsRinger ToneYou can set the handset ringer to use one of 7 ringer patterns for outside calls.“Tone 1” to “Tone 3” are bell ringer patterns. “Melody 1” to “Melody 4” are melodypatterns. The factory preset is “Tone 1”.• If you subscribe to a Distinctive Ring Service from your telephone company with 2or 3 consecutive rings, select a bell ringer pattern (Tone 1 to 3). If you select amelody pattern, you will not be able to distinguish lines by their ringers.• If you select one of the melody ringer patterns, the ringer will continue to sound forseveral seconds if:— the caller hangs up before you answer the call, or— another person answers the call using another phone connected on the sameline.1 Press [MENU].2 Scroll to “Ringer setting” by pressing [d]or [B], then press Select.3 Scroll to “Ringer tone” by pressing [d] or[B], then press Select.4 Select the desired ringer tone by pressing [d]or [B].• The handset will ring and the ringer tone willchange. If the ringer volume has been turned off,the handset will not ring (p. 18).• You can also select the ringer tone by pressing [1]to [7].5 Press Save, then press [OFF].HandsetRinger settingBack SelectK dB LRinger toneBack SelectK dB LRinger tone1:Tone 1Back SaveK dB LX14037ZB-1.fm 19 ページ２００４年４月１６日金曜日午前９時３４分