Troubleshooting66Answering SystemProblem Cause & RemedyThe Answering System is on,but incoming messages arenot recorded.• The recording time is set to “Greeting only”.Select “1 minute”, “2 minutes” or “3 minutes”(p. 23).• Memory is full. Erase unnecessary messages(p. 54).“ ” flashes and theANSWER ON indicatorflashes rapidly. No newmessages are recorded.• Memory is full. Erase unnecessary messages(p. 54).You cannot operate theAnswering System from thebase unit or the handset.• If the handset or base unit is in use, you maynot be able to operate the AnsweringSystem. Try again later.• If another user is listening to messages or theAnswering System is handling a call, youcannot operate the Answering System. Tryagain later.You cannot operate theAnswering System from atouch tone phone.• Make sure you entered the correct remotecode (p. 56).• The Answering System may not respond ifthe tones are too short to activate the unit.Press each button firmly.• The Answering System is off. Turn it on(p. 58).You cannot erase messages. • While another user is operating theAnswering System or a caller is leaving amessage, you cannot erase messages.When you play backmessages or turn on theAnswering System, thehandset and/or base unitannounces the wrong day andtime.• The date and time may be set incorrectly.Set the date and time again (p. 14).FULLPQQX14037ZA.book 66 ページ 2004年2月19日 木曜日 午後4時58分