Panasonic KX-TG2355S Operating Instructions Manual

Also see for KX-TG2355: Operating instructions

Contents

Panasonic KX-TG2355S Operating Instructions Manual Manual pdf 51 page image

Special FeaturesTelephone SystemFor assistance, please call: 1-800-211-PANA(7262) 51Key ToneYou can select whether or not the handset keys will sound tones (key tone,confirmation tone, error tone). The factory preset is ON.Re-registering the HandsetIf “No link to base. Move closer to base, try again.” is displayedeven when using the handset near the base unit, the handset may have lostcommunication with the base unit. You need to re-register the handset to the baseunit.• Make sure the base unit is not being used.• Have both the handset and base unit nearby during registration.• Follow steps 1 and 2 listed below. You have about 1 minute to completethem.• If the handset beeps 3 times and “Error!!” is displayed, an error occurred. Tryagain from step 1.• You can stop registration by pressing [OFF] on the handset, and pressing[LOCATOR/INTERCOM] on the base unit.1 Press [MENU].2 Scroll to “Initial setting” by pressing [d]or [B], then press Select.3 Scroll to “Key tone” by pressing [d] or [B],then press Select.4 Select “Off” or “On” by pressing [d] or [B].5 Press Save, then press [OFF].1 Base unit:Press and hold [LOCATOR/INTERCOM] until a beep sounds.• The CHARGE indicator flashes.2 Handset:Press and hold [FLASH/CALL WAIT] until“Handset Registering” is displayed.• When registration is complete, a beep soundsfrom the handset.• Wait for 20 seconds after registration iscomplete while the handset establishescommunication with the base unit.HandsetInitial settingBack SelectK dB LKey toneBack SelectK dB LKey tone:OnBack SaveK dB LHandset & Base UnitHandsetRegisteringHandset [1]Registered