Caller ID ServiceTelephone SystemFor assistance, please call: 1-800-211-PANA(7262) 31Talking Caller IDTo use this feature, you need to subscribe to Caller ID. For further information,please contact your telephone company.• If the unit does not receive Caller ID information, the unit will announce “Call fromout of area”, “Call from private caller”, or “Call from long distance”. If a call is receivedfrom an area where name display service is not available, “Number available” willbe announced.• If the ringer volume of the handset and base unit is off, caller names will not beannounced. The announcement is heard at the handset or base unit ringervolume (p. 17, 18).• If this feature is not turned on, caller names will not be announced (see below,p. 32).• If you have Call Waiting service, the second caller’s information will be displayedbut not announced (For Call Waiting Service Users, page 48).• Name pronunciation may vary. Name pronunciation quality is based on namesmost commonly used in the United States.• The unit will announce each letter of abbreviations, such as “Co.” and “Inc.”.• Caller ID supports names of up to 15 letters. If the caller’s name has more than15 letters, the name will not be displayed or announced correctly.• If you subscribe to a Distinctive Ring Service (such as IDENTA-RING) from yourtelephone company with 2 or 3 consecutive rings, your unit may mute one or moreof the rings in order to announce the name of the caller.To turn Talking Caller ID on or offYou can turn Talking Caller ID on or off for the handset and base unit separately. Ifthis feature is off, the unit will not announce caller names. The factory preset is ON.Handset Talking Caller ID feature1 Press [MENU].2 Scroll to “Talk Caller ID” by pressing [d]or [B], then press Select.3 Select “Off” or “On” by pressing [d] or [B].4 Press Save, then press [OFF].HandsetTalk Caller IDBack SelectK dB LTalk Caller ID:OnBack SaveK dB L