Programmable Settings33Handset ringer toneYou can change the ringer tone heardwhen an outside call is received. There are3 tones and 4 melodies. The defaultsetting is “Tone 1”.1 Press {MENU}.2 Scroll to “Ringer setting” bypressing {V} or {^}, then press {>}.3 Scroll to “Ringer tone” by pressing{V} or {^}, then press {>}.4 Press {V} or {^} repeatedly to selectthe desired setting.L You can also select the ringer tone bypressing {1} to {7}.L If the ringer volume has been turnedoff, the handset will not ring.5 Press {Save}, then press {OFF}.Note:L If you select one of the melody ringerpatterns, the ringer will continue tosound for several seconds if:– the caller hangs up before you answerthe call.– another person answers the call usinganother phone connected on thesame line.Handset interrupt toneThis tone lets you know when you receivea call while you are on an intercom call(page 28).“2” (default): The tone will sound 2 times.“On”: The tone will sound for as long as theline rings.“Off”: Turns this feature off.1 Press {MENU}.2 Scroll to “Ringer setting” bypressing {V} or {^}, then press {>}.3 Scroll to “Interrupt tone” bypressing {V} or {^}, then press {>}.4 Press {V} or {^} repeatedly to selectthe desired setting.5 Press {Save}, then press {OFF}.Ringer settingRinger toneRinger tone1=Tone 1KBack dB SaveLTG2431AL_2432AL(e).book Page 33 Tuesday, March 15, 2005 6:37 PM