Panasonic KX-TG2431AL Operating Instructions Manual

Contents

Answering System Features46*1 If pushed within the first 5 seconds of amessage, the previous message will beplayed.*2 To resume operation, enter a remotecommand within 15 seconds, or thevoice guidance will start.Turning on the answering systemremotelyIf the answering system is off, you can turnit on remotely.1 Dial your phone number.2 Let the phone ring 15 times.L The unit will answer your call with thegreeting message.L You can hang up, or if you call from atouch tone phone, you can enter yourremote code and begin remoteoperation (page 45).Skipping the greeting message to leavea messageYou can leave a message just as anyoutside caller can. Call your phonenumber, then press {*} to skip thegreeting message and record yourmessage after the beep.Answering systemsettingsRemote codeA remote code must be entered whenoperating the answering system remotely.This code prevents unauthorised partiesfrom listening to your messages remotely.Store any 2-digit number (00–99). Thedefault setting is “11”.1 Press {MENU}.2 Scroll to “Initial setting” bypressing {V} or {^}, then press {>}.3 Scroll to “Set answering” by pressing{V} or {^}, then press {>}.4 Scroll to “Remote code” by pressing{V} or {^}, then press {>}.5 Select the desired remote code byentering a 2-digit number (00–99).6 Press {Save}, then press {OFF}.Note:L To confirm the remote code, repeatsteps 1 to 4. Press {OFF} when finished.TG2431AL_2432AL(e).book Page 46 Tuesday, March 15, 2005 6:37 PM