Panasonic KX-TG2432 Operating Instructions Manual

Also see for KX-TG2431.: Operating instructions Quick guide Operating instructions

Contents

Caller ID Service28 For assistance, please call 1-800-211-PANA (7262).Editing a caller’s phone numberbefore calling backYou can edit a phone number in the callerlist by removing its area code and/or thelong distance code “1”.1 Press {V} or {^} to enter the caller list.2 Press {V} or {^} repeatedly to displaythe desired item.3 Press {Edit} repeatedly until the phonenumber is shown in the desired format.Each time you press {Edit}, the phonenumber will be rearranged into one of 3patterns.1 Local phone number2 Area code – Local phone number3 1 – Area code – Local phonenumber4 To return a call, press {C} or {s}.Caller ID number auto edit featureOnce you call back an edited number (see“Editing a caller’s phone number beforecalling back”), the unit can automaticallyedit other incoming phone numbers eachtime you receive a call.For example, you can use this feature toset the unit to ignore the area code ofcallers in your area code, so that you cancall these local numbers using callerinformation without dialing the area code.To activate this feature, you must edit anitem in the caller list (see “Editing a caller’sphone number before calling back”), thencall that number. After that, calls from thatcaller’s area code will be editedautomatically.This feature can be turned on or off (page36). The default setting is ON.Note:L The handset can remember up to 4 areacodes to be edited. Phone numbers fromthe 4 most recently edited area codeswill be automatically edited.L This feature will not be activated untiledited numbers are called back.L If you move to another area, you canturn this feature off to erase previouslyedited area codes. To use this featureagain, turn it on and reprogram the areacodes you want to edit once again.Storing caller information intothe phonebookItems in the caller list can be stored intoeach handset’s phonebook.1 Press {V} or {^} to enter the caller list.2 Press {V} or {^} repeatedly to displaythe desired item.L To edit the number, press {Edit}repeatedly until the number is shownin the desired format (see “Editing acaller’s phone number before callingback”, step 3).3 Press {Save}.L If there is no name information for thecaller, “Enter name” will bedisplayed.1 Enter the name if necessary (seepage 22, step 3).2 Press {Next}, then press {Save}.L To continue storing other items,repeat from step 2.4 Press {OFF} to exit.Note:L If the caller information does not includea phone number, you cannot store it inthe phonebook.Example:Example:Example:321-5555555-321-55551-555-321-5555