Panasonic KX-TG2432 Operating Instructions Manual

Also see for KX-TG2431.: Operating instructions Quick guide Operating instructions

Contents

Answering System FeaturesFor assistance, please call 1-800-211-PANA (7262). 49Ring countYou can change the number of times thephone rings before the unit answers calls.You can select “2”, “3”, “4” (default), “5”,“6”, “7”, or “Toll saver”.“Toll saver”: The unit answers on the2nd ring when new messages have beenrecorded, and on the 4th ring when thereare no new messages. If you call yourphone from outside to listen to newmessages (page 47), you will know thatthere are no messages when the phonerings for the 3rd time. You can then hangup without being charged for the call.1 Press {MENU}.2 Scroll to “Initial setting” bypressing {V} or {^}, then press {>}.3 Scroll to “Set answering” by pressing{V} or {^}, then press {>}.4 Scroll to “Ring count” by pressing {V}or {^}, then press {>}.5 Press {V} or {^} repeatedly to selectthe desired setting.L You can also select the ring count bypressing {0} (“Toll saver”), or {2}to {7}.6 Press {Save}, then press {OFF}.Caller’s recording timeYou can change the maximum messagerecording time allotted to each caller.“1min”, “2min”, or “3min” (default): Callermessages are limited to 1 minute to 3minutes.“Greeting only”: The unit plays thegreeting message but does not recordcaller messages.1 Press {MENU}.2 Scroll to “Initial setting” bypressing {V} or {^}, then press {>}.3 Scroll to “Set answering” by pressing{V} or {^}, then press {>}.4 Scroll to “Recording time” bypressing {V} or {^}, then press {>}.5 Press {V} or {^} repeatedly to selectthe desired setting.L You can also select the recordingtime by pressing {1} to {3}, or {0}(“Greeting only”).6 Press {Save}, then press {OFF}.Note:L If message memory becomes full, theunit will automatically switch to the“Greeting only” mode.