Answering System Features47*1 If pushed within the first 5 seconds of amessage, the previous message will beplayed.*2 To resume operation, enter a remotecommand within 15 seconds, or thevoice guidance will start.Turning on the answering systemremotelyIf the answering system is off, you can turnit on remotely.1 Dial your phone number.2 Let the phone ring 15 times.L The unit will answer your call with thegreeting message.L You can hang up, or if you call from atouch tone phone, you can enter yourremote code and begin remoteoperation (page 46).Skipping the greeting message to leavea messageYou can leave a message just as anyoutside caller can. Call your phonenumber, then press {*} to skip thegreeting message and record yourmessage after the beep.Answering systemsettingsRemote codeA remote code must be entered whenoperating the answering system remotely.This code prevents unauthorized partiesfrom listening to your messages remotely.Store any 2-digit number (00–99). Thedefault setting is “11”.1 Press {MENU}.2 Scroll to “Initial setting” bypressing {V} or {^}, then press {>}.3 Scroll to “Set answering” by pressing{V} or {^}, then press {>}.4 Scroll to “Remote code” by pressing{V} or {^}, then press {>}.5 Select the desired remote code byentering a 2-digit number (00–99).6 Press {Save}, then press {OFF}.Note:L To confirm the remote code, repeatsteps 1 to 4. Press {OFF} when finished.Ring countYou can change the number of times thephone rings before the unit answers calls.You can select “2”, “3”, “4” (default), “5”,“6”, “7”, or “Toll saver”.“Toll saver”: The unit answers on the2nd ring when new messages have beenrecorded, and on the 4th ring when thereare no new messages. If you call yourphone from outside to listen to newmessages (page 46), you will know thatthere are no messages when the phonerings for the 3rd time. You can then hangup without being charged for the call.1 Press {MENU}.TG2433BX_2434BX(e).book Page 47 Thursday, March 31, 2005 10:57 AM