Panasonic KX-TG2583ALS Operating Instructions Manual

Contents

Important Information (For Australia only)85SOCKETSCREW “A”PLUGFig. 1 TELEPHONE CORDConnect to the PLUGas shown in Fig. 1.( )SCREW“B”Fig. 2SCREW “B”Fig. 3SOCKETSCREW “A”Fig. 4Instructions to customerInstallationAttached to this apparatus is an approval label. This label is evidence thatit is a “Permitted Attachment” which has been authorised to be connectedto your telephone service.Conditions relating to connection and operation of this PermittedAttachment are contained in Telecommunications General By-Law 220 (5).You are authorised to install this Permitted Attachment yourself byplugging it into the line socket of any regular telephone. You may connectit in place of your existing telephone or to any spare telephone socketinstalled in your premises.To disconnect your existing telephone you must first remove its plug fromthe line socket. You can then insert the plug of your Permitted Attachmentinto the socket and use your equipment.If the plug of your existing telephone cannot be readily removed, you willhave to remove the screw securing it. To do this proceed as follows:1. Loosen screw “A” sufficiently to remove the socket cover.(See Fig. 1.)2. Remove screw “B” and withdraw the plug. (See Fig. 2.)3. Replace screw “B”. (See Fig. 3.) Ensure that it screws completely intothe socket recess. (If the screw is too long, increase the hole depth orreplace the screw with one 5 mm shorter.)4. Replace socket cover and tighten screw “A”. (See Fig. 4.)Useful Information

/ 88

Related manuals for Panasonic KX-TG2583ALB