Panasonic KX-TG2621AL Operating Instructions Manual

Programming30*1 If you subscribe to Caller ID service and want to view the caller’s information after liftingup the handset to answer a call, turn off this feature.*2 KX-TG2622*3 This tone lets you know when you receive a call while you are on an intercom call. If youselect “On”, the tone sounds repeatedly for as long as the line rings. If you select “2”, thetone only sounds 2 times (KX-TG2622).*4 You can select whether or not key tones are heard when keys are pressed. Includesconfirmation tones and error tones.*5 Generally, the line mode setting should not be adjusted. If “Line in use” is notdisplayed when another phone connected to the same line is in use, you need tochange the line mode to “A”.*6 The recall time depends on your telephone exchange or host PBX. Consult your PBXsupplier if necessary.You can access your service provider/telephone company “Call Waiting” service byhaving the recall time set at 100 ms, and then follow your service provider/telephonecompany “Call Waiting” instructions to operate this service.Set recall time*6 {0}{5}{2} {1}: 700ms {2}: 600ms{3}: 400ms {4}: 300ms{5}: 250ms {6}: 110ms{7}: <100ms> {8}: 90msrVoice enhancer {5} {1}: On {0}: <Off> –Feature FeaturecodeSetting code SystemsettingTG2621AL_2622AL.book Page 30 Monday, February 20, 2006 3:40 PM