Useful Information36Error messagesIf the unit detects a problem, one of the following messages is shown on the display.Display message Cause/solutionBusy L Another handset or the called handset is in use. *1L The handset you tried to copy phonebook items to is inuse.*1L The handset you are calling is too far from the baseunit.*1Dial locked L Dial lock is turned on. To turn it off, see page 20.Error!! L The handset’s registration has failed. Move the handsetand base unit away from all electrical appliances and tryagain.L Another handset user tried to send phonebook items toyou but there was an error. Have the other handset userre-send the items to you (page 23). *1L The entered password was wrong in programming diallock. Enter the correct password.---Incomplete---Phonebook fullL The destination unit’s phonebook memory is full. Eraseunnecessary items from the destination unit’sphonebook (page 22).*1Invalid L The other handset is not registered. *1No items stored L Your phonebook or redial list is empty.No link to base.Move closer tobase, try again.L The handset has lost communication with the base unit.Move closer to the base unit, and try again.L Confirm that the base unit’s AC adaptor is plugged in.L Raise the base unit antenna.L The handset’s registration may have been cancelled.Re-register the handset (page 33).Phonebook full L There is no space to store new items in the phonebook.Erase unnecessary items (page 22).Please lift up andtry again.L A handset button was pressed while the handset wason the base unit or charger. Lift the handset and pressthe button again.TG2621AL_2622AL.book Page 36 Monday, February 20, 2006 3:40 PM