Caller ID Service26Caller listViewing the caller list andcalling back1 Press {^} or {V} to enter the caller list.2 Press {V} to search from the mostrecent call, or {^} to search from theoldest call.3 {C}Note:L If you do not want to dial the area codeswhen making calls from the Caller ID list,you can store the area codes which youwant the unit to delete automatically(page 26).L KX-TG2632:Each handset has its own caller list. Ifyou viewed the caller list or answered acall on one handset, the sameinformation in the other handsets isdisplayed as “missed calls”.L You can also press {Rcvd calls} toenter the caller list.L If the same caller calls more than once, itis displayed with the number of times thecaller called (“×2” to “×9”). Only the dateand time of the most recent call isstored.L A Q is displayed next to items whichhave already been viewed or answered.L If an arrow (→ ) is displayed after thenumber, the whole phone number is notshown. Press {*} to see the remainingnumbers or to return to the previousdisplay. Each time you press {*}, thedisplay changes alternately.Storing your area codeWe recommend storing your area codebefore using Caller ID (page 25). Callsfrom the same area will be recorded in thecaller list without the area code. You do nothave to remove it before calling back thecaller or storing in the phonebook.1 {MENU} i {0}{4}2 Enter your area code (max. 8 digits).L To correct a digit, press {<} or {>} tomove the cursor, then press{CLEAR}. Enter the correct number.3 {Save} i {OFF}To erase your area codePress and hold {CLEAR} in step 2, press{Save}, then press {OFF}.Editing a caller’s phone numberbefore calling backYou can edit a phone number in the callerlist.1 Press {^} or {V} to enter the caller list.2 Select the desired item. i {Edit}3 Add or erase digits to the beginning ofthe number as necessary.L To add a digit, press the desired dialkey.L To erase a digit, press {CLEAR} or{#}.4 {C}TG2631AL_2632AL.book Page 26 Monday, February 20, 2006 2:54 PM