Panasonic KX-TG2650ALN Operating Instructions Manual

Contents

37Advanced Operation7 To turn the call group feature on, select“On” by pressing Ü or á.If not required, select “Off”.•When “On” is selected, the display will light inorange and a different ringer pattern will beheard. When “Off” is selected, an ordinaryringer pattern will be heard.8 Press Ö (Next key).•If you want to change the storing name,number or group setting, press Ñ (Edit key)repeatedly to reach the desired display andchange it.9 Press á (Save key).•A beep sounds.•To continue storing other items, repeat fromstep 2.•To return to the standby mode, press (OFF).•If a pause is required for dialling, (REDIAL/PAUSE) can be stored in a phonenumber in step 5. This counts as one digit (p. 46).•You can exit the programming mode any time by pressing (OFF).•If the display shows “Directory full” in step 2, press (OFF). To erase otherstored items from the directory, see page 43.•After the maximum of 90 items has been stored, “Directory full” is alsodisplayed.•If 3 beeps sound and the display shows “Save error”, move closer to the baseunit and start again from step 1.Tom Jones0987654321F=Edit H=SaveSet group:OnIH G=NextTom Jones0987654321For New Zealand Users:Your telephone company may charge you for a local call if thenumber dialled has the area code prefix included. If the charge for localcall is unacceptable, only the 7-digits of the local number should be dialledfrom your telephone. Do not dial the “0” prefix or the area code digit.