Panasonic KX-TG2721AL Operating Instructions Manual

Also see for KX-TG2721AL: Operating instructions

Panasonic KX-TG2721AL Operating Instructions Manual Manual pdf 20 page image

*6 If you subscribe to a Caller ID service and want to view the caller’s information after lifting upthe handset to answer a call, turn off this feature.*7 If you do not want the unit to ring before the caller information is received, set to “Off”.(Caller ID subscribers only)You can only remove the first ring if the unit rings two times or more by default, whichdepends on your service provider/telephone company.*8 The recall/flash time depends on your telephone exchange or host PBX. Contact your PBXsupplier if necessary.You can access your service provider/telephone company “call waiting” service by havingthe recall/flash time set at “100 msec.”, and then follow your service provider/telephonecompany “call waiting” instructions to operate this service.*9 To prevent other users from joining your conversations with outside callers, turn this featureon.Special programmingAlarmAn alarm sounds at the set time for 3 minutesonce or daily. Alarm can be set for eachhandset.Important:R Set the date and time beforehand(page 12).1 M N2 MbN: “Handset Setup” a M N3 MbN: “Alarm” a M N4 MbN: Select the desired alarm option. aM N“Off”Turns alarm off. Go to step 8.“Once”An alarm sounds once at the set time.“Daily”An alarm sounds daily at the set time.Go to step 6.5 Enter the desired date and month.6 Set the desired time. a M N7 MbN: Select the desired alarm tone. aM NR We recommend selecting a differentringer tone from the one used foroutside calls.8 M N a M NR When the alarm is set, is displayed.Note:R To stop the alarm, lift the handset andpress M N or place the handset on thebase unit or charger.R When the handset is in use, the alarm willnot sound until the handset is in standbymode.Storing an area code to bedeleted automaticallyIn some situations, phone numbers storedautomatically in the caller list (page 23) willinclude area codes. If you do not want to dialthe area code when making calls from thecaller list, you can store the area code whichyou want the unit to delete automatically.Example: You have stored the area code“123”. If you make a call from the caller list tothe phone number “123-456-7890”, the unitdials “456-7890”.1 M N2 MbN: “Base Unit Setup” a M N3 MbN: “Area Code” a M N20Programming