Temporary handset ringer offWhile the handset is ringing for a call, you canturn the ringer off temporarily by pressingM N.Useful features during acallHoldThis feature allows you to put an outside callon hold.1 Press M N during an outside call.2 MbN: “Hold” a M N3 To release hold, press M N.R Another handset user can take the callby pressing M N. (KX-TG2722)Note:R If a call is kept on hold for more than 9minutes, the call rings at your handsetagain. After 1 additional minute on hold, thecall is disconnected.R If another phone is connected to the sameline, you can also take the call by lifting itshandset.MuteWhile mute is turned on, you can hear theother party, but the other party cannot hearyou.1 Press M N during conversation.2 To return to the conversation, pressM N again.Recall/flashMR/ECON allows you to use the specialfeatures of your host PBX such as transferringan extension call, or accessing optionaltelephone services.Note:R To change the recall/flash time, seepage 19.For Call Waiting or Call WaitingCaller ID service usersTo use call waiting or Call Waiting Caller ID,you must first subscribe with your serviceprovider/telephone company.This feature allows you to receive calls whileyou are already talking on the phone. If youreceive a call while on the phone, you will heara call waiting tone.If you subscribe to both Caller ID and CallWaiting with Caller ID services, the 2ndcaller’s information is displayed after you hearthe call waiting tone on the handset.1 Press MR/ECON to answer the 2nd call.2 To switch between calls, press MR/ECON.Note:R Please contact your service provider/telephone company for details andavailability of this service in your area.Call shareAvailable for:KX-TG2722You can join an existing outside call.To join the conversation, press M N whenthe other handset is on an outside call.Note:R To prevent other users from joining yourconversations with outside callers, turn theprivacy mode on (page 19).15Making/Answering CallsTG2721_2722NZ(en)_0807_ver002.pd15 15 2012/08/07 10:29:46