Multi-unit Operation51IntercomIntercom calls can be made between acordless handset and the base unit, andbetween the cordless handset and acompatible Panasonic handset (page 4).Call the desired unit by selecting theextension number, shown in each cordlesshandset’s display while in not use. (Theextension number is not displayed whenthe date and time are not set or you havemissed calls.) The base unit’s extensionnumber is “0”.Note:L You can locate a misplaced cordlesshandset by paging it. (Handset locator)L When you page all units, the user whoanswers first can talk with you.Interrupt toneIf you receive a phone call while talking onthe intercom, you will hear the ringer tone.Base unit: The selected ringer tone foroutside call (page 22).Cordless handset: “Tone 1”To answer the callCordless handset:Press {关闭}, then press {通话} or {s}.Base unitUsing the handset: Place the handset onthe cradle, then lift the handset or press{免提通话}.Using the speakerphone: Press{免提通话}, then lift the handset or press{免提通话}.Making an intercom callUsing the cordless handset1 Press { 内线通话 }.More than 2 cordless handsets:To page the base unit, press {0}.To page other handset, press itsextension number ({1} to {6}).To page all units, press {*}.L The destination unit will ring.L If Voice Paging is turned on (page52), speak into the microphone afterthe two rings.2 To end the intercom call, press { 关闭 }.Note:L During an intercom call, you cannotswitch to the speakerphone.Using the base unit1 Lift the handset, then press {内线通话}.ORPress { 内线通话 } to use thespeakerphone.More than 2 cordless handsets:To page other handset, press itsextension number ({1} to {6}).To page all units, press {*}.L The destination unit will ring.L If Voice Paging is turned on (page52), speak into the microphone afterthe two rings.2 To end the intercom call,Press { 内线通话 }ORPlace the handset on the cradle.ENG_TG2871CN.book 51 ページ 2006年5月1日 月曜日 午前11時33分