Panasonic KX-TG3611BX User Manual

Programming19Special programmingNight modeNight mode allows you to select a periodof time during which the handset will notring for outside calls. This feature isuseful for time periods when you do notwant to be disturbed, for example, whilesleeping. Night mode can be set for eachhandset.Important:L Set the date and time beforehand(page 10).L If you have set the alarm, the alarmsounds even if the night mode isturned on.Setting the start and end time1 {MENU} i {#}{2}{3}{7}2 Enter the desired hour and minuteyou wish to start this feature.3 {AM/PM}: Select “AM” or “PM”. i{V}4 Enter the desired hour and minuteyou wish to end this feature.5 {AM/PM}: Select “AM” or “PM”.6 {Save} i {OFF}Note:L To correct a digit, press {^}, {V}, {<},or {>} to move the cursor to the digit,then make the correction.Turning night mode on/off1 {MENU} i {#}{2}{3}{8}2 {V}/{^}: Select “On” or “Off”. i{Save} i {OFF}Note:L When the night mode is turned on,“Night mode” is displayed duringthe selected period.AlarmYou can set one of 2 different alarmoptions (once or daily) at a time for eachhandset. An alarm sounds at the set timefor 3 minutes.You can choose an alarm sound from 3tones and 4 melodies.Important:L Set the date and time beforehand(page 10).1 {MENU} i {#}{7}{2}{0}2 {V}/{^}: Select the desired alarmoption. i {Select}3 Set the desired time. i {OK}4 {V}/{^}: Select the desired alarmtone. i {Save}L We recommend selecting adifferent one for outside calls.5 {OFF}Note:L To stop the alarm, press any dial keyor place the handset on the base unitor charger.L When the handset is in use, the alarmwill not sound until the handset is instandby mode.L If you select “Once”, the settingchanges to “Off” after the alarmsounds.Off Turns alarm off. Go tostep 5.Once An alarm sounds once atthe set time. Enter thedesired date, month, andyear.Daily An alarm sounds daily atthe set time.TG361xBX(e).book Page 19 Friday, February 6, 2009 11:40 PM