Useful Information29RegistrationProblem Cause/solutionThe handset registration mayhave been canceled or thecommunication between thebase unit and the handset isunstable.L Re-register the handset.1 Handset: {MENU} i {#}{1}{3}{0}2 Base unit: Press and hold {x} (Locator)for about 4 seconds. (No registrationtone)– If another registered handset startringing, press the same button to stop.Then repeat this step. (KX-TG3612)– The next step must be completedwithin 90 seconds.3 Handset: Press {OK}, then wait until along beep sounds. i {OFF}– While registering, “Base registering”is displayed on another handset.(KX-TG3612)If the registration fails, try to deregister thehandset.KX-TG3611Press {MENU} i {#}{1}{3}{1} i{3}{3}{5} i {OK} i {1}, then re-registerit again.KX-TG3612Use another handset to deregister theunstable handset. Press {MENU} i{#}{1}{3}{1} i {3}{3}{5} i {OK} i{1} or {2} (The handset number which youwant to cancel). Try to re-register it again.L If the above remedy does not solve theproblem, contact your nearest Panasonicservice center.TG361xBX(e).book Page 29 Friday, February 6, 2009 11:40 PM