Panasonic KX-TG3620 Operating Instructions Manual

Also see for KX-TG3620: Operating instructions Operating instructions

Erasing all messagesPress MERASEN 2 times while the unit is not inuse.Using the handsetWhen new messages have been recorded,“New message” is displayed.1 To listen to new messages:MMENUN#323To listen to all messages:MMENUN#3242 When finished, press MOFFN.Operating the answering systemMMENUN a MbN: “Answering device” aMSELECTNKey OperationMDN or MCN Adjust the receiver/speakervolume (during playback)1 or MFN Repeat message (duringplayback)2 or MEN Skip message (duringplayback)3 Enter the “Settings” menu4 Play new messages5 Play all messages6 Play greeting message76 Record greeting message8 Turn answering system onMPAUSEN Pause message*19 orMSTOPNStop recordingStop playback0 Turn answering system off*4 Erase currently playingmessage*5 Erase all messages*6 Reset to a pre-recordedgreeting message*1 To resume playback:MbN: “Playback” a MSELECTNCalling back (Caller ID subscribersonly)1 Press MPAUSEN during playback.2 MbN: “Call back” a MSELECTNRemote operationYou can use a touch-tone phone to call theunit while away from home and listen tomessages.Remote access codeFor security, a 3-digit remote access codemust be entered when operating theanswering system remotely. The defaultsetting is “111”.Important:R To prevent unauthorized access to thisproduct, we recommend that you regularlychange the remote code.1 MMENUN#3062 Enter the desired 3-digit remote accesscode.R To deactivate remote operation, press*.3 MSAVEN a MOFFNUsing the answering systemremotely1 Dial your phone number from atouch-tone phone.2 After the greeting message starts, enteryour remote access code.3 Follow the voice guidance prompts asnecessary or control the unit usingremote commands (page 26).4 When finished, hang up.For assistance, please visit http://shop.panasonic.com/support 25Answering SystemTGC35x_36x(en)_1116_ver012.pdf 25 2015/11/16 9:16:36