Panasonic KX-TG4025 Operating Instructions Manual

Programming23For assistance, please visit http://www.panasonic.com/helpRegistering a unitOperating additional unitsAdditional handsetsUp to 6 handsets can be registered tothe base unit.Important:L See page 5 for information on theavailable model.Registering a handset to thebase unitThe supplied handset and base unit arepre-registered. If for some reason thehandset is not registered to the baseunit, re-register the handset.1 Handset:{MENU}2 {V}/{^}: “Initial setting” i{OK}3 {V}/{^}: “Registration” i{OK}4 {V}/{^}: “HS registration” i{OK}5 Base unit:■ KX-TG4011 series: page 3Press and hold {LOCATOR} forabout 5 seconds. (No registrationtone)■ KX-TG4021/KX-TG4071 series:page 3Press and hold {LOCATOR} forabout 5 seconds until theregistration tone sounds.L If all registered handsets startringing, press the same button tostop. Then repeat this step.L The next step must be completedwithin 90 seconds.6 Handset:Press {OK}, then wait until a longbeep sounds.Note:L While registering, “Base inregistering mode” is displayed onall registered handsets.L When you purchase an additionalhandset, refer to the additionalhandset’s installation manual forregistration.Deregistering a handsetA handset can cancel its ownregistration (or the registration ofanother handset) that is stored to thebase unit. This allows the handset to endits wireless connection with the system.1 {MENU}2 {V}/{^}: “Initial setting” i{OK}3 {V}/{^}: “Registration” i{OK}4 {V}/{^}: “Deregistration” i{OK}5 {3}{3}{5} i {OK}6 Select the handset(s) you want tocancel by pressing the desiredhandset number ({1}-{6}). i{OK}L The selected handset number(s)flashes.L To undo a selection, press thehandset number again. Thenumber stops flashing.7 {V}/{^}: “Yes” i {OK}8 {OFF}TG401x.book Page 23 Friday, December 3, 2010 1:36 PM