Making callsUsing the base unit1 Dial the phone number.R To correct a digit, press MCLEARN.2 Lift the corded handset.3 When you finish talking, place the cordedhandset on the cradle.Note:R You can also dial the phone number after liftingthe corded handset.Using the speakerphone1 During a conversation on the corded handset,press MSP-PHONEN to turn on thespeakerphone.R You can place the corded handset on thecradle.R Speak into the base unit microphone.R Speak alternately with the other party.2 When you finish talking, press MSP-PHONEN.Note:R For best performance, use the speakerphone ina quiet environment.R To switch to the receiver, lift the corded handset.Making a call using the redial listThe last 10 phone numbers dialed are stored inthe redial list (each 48 digits max.).1 MREDIALN2 MbN: Select the desired phone number.3 Lift the corded handset.Erasing a number in the redial list1 MREDIALN2 MbN: Select the desired phone number. aMERASEN3 MbN: “Yes” a MSELECTN4 MEXITNUsing the handset1 Lift the handset and dial the phone number.R To correct a digit, press MCLEARN.2 Press M N or MCALLN.3 When you finish talking, press MOFFN or placethe handset on the charger.Using the speakerphone1 Dial the phone number and press M N.R Speak alternately with the other party.2 When you finish talking, press MOFFN.Note:R For best performance, use the speakerphone ina quiet environment.R To switch back to the receiver, pressM N/M N.Making a call using the redial listThe last 5 phone numbers dialed are stored in theredial list (each 48 digits max.).1 MREDIALN or MEN REDIALR If there is a new message in the voice mailor answering system, MREDIALN is notdisplayed.2 MbN: Select the desired phone number.3 M NErasing a number in the redial list1 MREDIALN or MEN REDIAL2 MbN: Select the desired phone number. aMERASEN3 MbN: “Yes” a MSELECTN4 MOFFNAdjusting the receiver or speakervolumeBase unitPress MDN or MCN repeatedly while talking.HandsetPress MjN or MkN repeatedly while talking.Note for handset:R There are 5 volume levels (1 to 5) for thereceiver. When you change the receiver volumeto level 5 (maximum level), the volume returnsto level 4 (default) after you hang up.For assistance, please visit http://www.panasonic.com/help 13Making/Answering Calls