Panasonic KX-TG4773B Operating Instructions Manual

Panasonic KX-TG4773B Operating Instructions Manual Manual pdf 38 page image

IntercomIntercom calls can be made:– between the base unit and a handset– between handsetsNote:R When paging unit(s), the paged unit(s) beepsfor 1 minute.R If you receive an outside call while talking on theintercom, you hear 2 tones.– To answer the call with the base unit, placethe corded handset on the cradle, then lift itagain. If the speakerphone is used, pressMSP-PHONEN 2 times.– To answer the call with the handset, pressMOFFN, then press M N.Making an intercom callBase unit1 Press MINTERCOMN.When 2 or more handsets are registered:– To page a specific handset, enter thehandset number.– To page all handsets, press 0 or wait for afew seconds.R Lift the corded handset if needed.R To stop paging, press MINTERCOMN.2 When you finish talking, press MINTERCOMNor place the corded handset on the cradle.Handset1 MMENUN a MINTN2 MbN: Select the desired unit. a MSELECTNR To stop paging, press MOFFN.3 When you finish talking, press MOFFN.Answering an intercom callBase unit1 Lift the corded handset or press MINTERCOMNto answer the page.2 When you finish talking, place the cordedhandset on the cradle or press MINTERCOMN.Handset1 Press M N to answer the page.2 When you finish talking, press MOFFN.Handset locatorYou can locate a misplaced handset by paging it.1 Base unit: Press MLOCATORN.R All registered handsets beep for 1 minute.2 To stop paging:Base unit:Press MLOCATORN.Handset:Press M N, then press MOFFN.Transferring calls,conference callsOutside calls can be transferred or a conferencecall with an outside party can be made:– between the base unit and a handset– between 2 handsetsBase unit1 During an outside call, press MINTERCOMN.When 2 or more handsets are registered:– To page a specific handset, enter thehandset number.– To page all handsets, press 0 or wait for afew seconds.2 Wait for the paged party to answer.R If paged party does not answer, pressMINTERCOMN to return to the outside call.3 To complete the transfer:Place the corded handset on the cradle.R The outside call is being routed to thehandset.To establish a conference call:Press MCONFN.R To leave the conference, place the cordedhandset on the cradle. The other 2 partiescan continue the conversation.R To put the outside call on hold, pressMHOLDN. To resume the conference, pressMCONFN.Handset1 During an outside call, press MINTN to put thecall on hold.2 MbN: Select the desired unit. a MSELECTN3 Wait for the paged party to answer.R If the paged party does not answer, pressM N to return to the outside call.38 For assistance, please visit http://www.panasonic.com/helpIntercom/Locator