Telephone System Useful InformationAdvanced OperationPreparation37For assistance, please call: 1-800-211-PANA(7262)IntercomIntercom between Handsets(When the System Has Two or More Handsets)Intercom calls can be made between two handsets (when the system has two ormore handsets, p. 3). Page the desired unit(s) by entering the extension number,shown in the top right of each handset’s display.Ex. From the Handset 1 to the Handset 2• If the Auto Talk feature is turned on (p. 16), you can also answer a page by simplylifting the handset off the base unit or charger (for KX-TG5202 or accessoryhandset users, p. 3).• When the ringer volume is turned off (p. 17), the handset will ring at the low levelfor intercom calls.• You cannot change the ringer tone for intercom calls.1 Handset 1:Press [HOLD/INTERCOM].2 Handset 1:To page another handset, press its extensionnumber ([1] to [4]).• The paged handset will ring for 1 minute and theRinger/Message Alert indicator flashes rapidly.• To stop paging, press [OFF].3 Handset 2:Press [C], [s] or [HOLD/INTERCOM] toanswer the page.• Any button except [d], [B] or [OFF] can bepressed to answer the page.4 Handset 1:When the paged party answers, start talking.5 Handset 1 or Handset 2:To disconnect the intercom, press [OFF].During an intercom call:• You can switch to the speaker by pressing [s]. To switch back to the receiver,press [C].• If you have difficulty hearing while using the speakerphone on the handset,decrease the speaker volume by pressing [d].• If an incoming call is being received, you will hear two tones (incoming calltone, p. 46) and the IN USE indicator on the base unit will flash rapidly.To answer the call, press [OFF], then press [C] or [s].HandsetPress extension#to call1-4=HandsetCalling HS[2]Ex. Calling Handset 2Call from HS[1]Ex. Handset 1 callingIntercom00-00-05D 12