Canceling Registration/Re-registration66Make sure the base unit and the other handsets are not being used. Have boththe handset and base unit nearby during registration.ï You can stop registration by pressing [OFF] on the handset and pressing[LOCATOR/INTERCOM/TRANSFER] on the base unit.ï If ìWrong handset Refer to manualî is displayed, the handset you tried toregister is not for this base unit. This handset is for KX-TG6500 base unit. Theaccessory handsets for this base unit are KX-TGA520 and KX-TGA523. To order,see page 3.If you have canceled handset registration at a previous base unit (p. 65), startfrom step 5.1 Handset: Press [MENU].2 Handset: Scroll to ìInitial settingî bypressing [d] or [B], then press the soft key( ).3 Handset: Scroll to ìRegistrationî bypressing [d] or [B], then press the soft key( ).4 Handset: Press the soft key ( ) at ìHSregistrationî.5 Base unit:Press and hold [LOCATOR/INTERCOM/TRANSFER] for 3 seconds.ï The CHARGE indicator flashes. After the CHARGE indicator starts flashing,the rest of the procedure must be completed within 1 minute.6 Handset:(1) Press the soft key ( ).(2) Wait until a long beep sounds and thedisplay shows the new extension number(ex. extension number 2).ï Registration is complete.If you have not canceled the handsetís registration at the previous base unit(p. 65), the handset number remains in that base unitís memory. To erase thehandset number from the previous base unit, see the base unitís OperatingInstructions. For the KX-TG5230 base unit: (1) Press and hold [LOCATOR/INTERCOM/TRANSFER] for 3 seconds, and (2) Press and hold the handsetnumber [1] ( ) to [4] ( ) that you do not want for 5 seconds. A long beepsounds, then the handset number is erased.SELECTInitial settingSELECTRegistrationSELECTHS registrationO KPress LOCATORon base unitfor 3 sec.Then press OKBOX 1 BOX 2 O KSPIPRIVACY1Handset [2]RegisteredIN USE [2 ]