Panasonic KX-TG5230 Operating Instructions Manual

Also see for KX-TG5230: Operating instructions

Contents

Panasonic KX-TG5230 Operating Instructions Manual Manual pdf 19 page image

Programmable SettingsBase unit ringer volumeMake sure the base unit is not being used.To set the ringer volume to high (preset), medium, or low, press [V] or [A].• To increase volume, press [A]. To decrease volume, press [V].• To stop ringing, press [0].To turn the ringer off, press and hold IV] until 2 beeps sound.To turn the ringer on, press [V] or [A].• The base unit wilt ring at the low level.• You can adjust the ringer volume while an outside call is ringing.Press [V] or [A] while the base unit is ringing.To turn the ringer off, press and hold [V] until 2 beeps sound.Ringer ToneYou can set the handset and base unit ringers to use one of 7 ringer patterns foroutside calls. "Tone 1" to "Tone 3" are belt ringer patterns. "Melody 1" to "Melody 4"are melody patterns. The factory preset is "Tone 1%• You cannot change the ringer tone for intercom calls.• If you subscribe to a Distinctive Ring Service (such as IDENTA-RING) from yourtelephone company with 2 or 3 consecutive rings, select a belt ringer pattern (Tone1 to 3). If you select a melody pattern, you will not be able to distinguish lines bytheir ringers.• If you select one of the melody ringer patterns, the ringer will continue to sound forseveral seconds if:-- the caller hangs up before you answer the call, or-- another person answers the call using another phone connected on the same line.Handset ringer tone1 Press [MENU].2 Press the soft key (l_ll!'-J_) at "Ringersetting".3 Scrollto"Ringer tone" by pressing[V] or[A], then press the soft key (_'_llr-.r_).4 Select the desired ringer tone by pressing[v] or [A].• The handset will ring and the ringer tone wiltchange. If the ringer volume has been turned off,the handset wilt not ring (p. 18).• You can also select the ringer tone by pressing[1] to [7].5 Press the soft key (IL"4r_'_ll),then press [OFF].19