Special FeaturesUsing the PAUSE Button (For PBX Line/Long Distance Calls)We recommend you press the soft key (_) on the handset or press [REDIAL/PAUSE] on the base unit if a pause is required for dialing with a PBX or to make along distance call.• "_" is displayed on the handset only when dialing before pressing ["%] or [<-](p. 23), or storing numbers in the phone book (p. 34).Ex. Line access number [9] (PBX)[9] O Soft key (1_2_!"-II)or [REDIAL/PAUSE] O IPhone number I• Pressing the soft key (1_) on the handset or [REDIAL/PAUSE] on the baseunit once creates a 3.5 second pause. This prevents misdialing when you dialafter confirming the entered number (p. 23) or dial a stored number (p. 36, 37, 41 ).• Pressing the soft key (l_Jt_l-'-II)on the handset or [REDIAL/PAUSE] on the baseunit more than once increases the length of the pause between numbers.For Call Waiting Service Users __Press [FLASH/CALL WAIT] if you hear a call waiting tone during aconversation.• The first call is put on hold and you can answer the second call.• To return to the first caller, press [FLASH/CALL WAIT] again.• Call Waiting service cannot be used when the first call is put on hold.• If this function does not operate properly, consult your telephone company for details.Call Waiting Caller ID displayIf you subscribe to both Caller ID and Call Waiting withCaller ID services (CWlD), when a second call is receivedwhile talking, the second caller's information wilt bedisplayed. After you hear a call waiting tone while talking,the display shows the caller's name with the phonenumber and "Waiting".• Contact your telephone company for details about availability in your area, and toverify that CWID service is activated on your telephone line.• The caller's information will only be shown on the display of the handset which ison the outside call.• The second caller's name will not be announced even if the Talking Caller IDfeature is on (p. 28).BROWN,NANCY1-555-666-7777.... Waiting .....55