Answering System FeaturesFor assistance, please visit http://www.panasonic.com/consumersupport 51Caller’s recording timeYou can change the maximum messagerecording time allotted to each caller.“1min”, “2min”, or “3min” (default): Callermessages are limited to 1 minute to 3minutes.“Greeting only”: The unit plays thegreeting message but does not recordcaller messages.1 Press {MENU}.2 Scroll to “Initial setting” bypressing {V} or {^}, then press {>}.3 Scroll to “Set answering” by pressing{V} or {^}, then press {>}.4 Scroll to “Recording time” bypressing {V} or {^}, then press {>}.5 Press {V} or {^} repeatedly to selectthe desired setting.L You can also select the recordingtime by pressing {1} to {3}, or {0}(“Greeting only”).6 Press {Save}, then press {OFF}.Note:L If message memory becomes full, theunit will automatically switch to the“Greeting only” mode.Message alertYou can select whether or not themessage indicator on the handset willflash when new messages have beenrecorded (page 45). The default setting isOFF.1 Press {MENU}.2 Scroll to “Initial setting” bypressing {V} or {^}, then press {>}.3 Scroll to “Message alert” by pressing{V} or {^}, then press {>}.4 Press {V} or {^} repeatedly to select“On” or “Off”.5 Press {Save}, then press {OFF}.Note:L The message indicator will not flash fornew messages while the handset is inuse.L While message alert is on, batteryoperating time will be shortened (page12).