Panasonic KX-TG585SK Operating Instructions Manual

Also see for KX-TG585SK: Operating instructions Operating instructions Quick guide Operating instructions Service manual

Contents

– “Off”: Voice announcement is notavailable as alert.You can configure this setting using either thebase unit or one of the handsets.Handset / Base unit1 For CELL 1: MMENUN#6031For CELL 2: MMENUN#60322 MbN: Select the desired setting. aMSAVEN3 Proceed with the operation for your unit.Handset: MOFFNBase unit: MEXITNSelecting the alert toneHandset1 For CELL 1: MMENUN#6041For CELL 2: MMENUN#60422 MbN: Select the desired setting.3 MSAVEN a MOFFNTemporary alert offYou can temporarily disable the alerts bypressing MAPP ALERTSN.Base unitPress MAPP ALERTSN to temporarily disablealerts.R is displayed.R To enable alerts again, press MAPPALERTSN again.Using a Bluetooth wirelessheadset (optional) forlandline callsBy pairing a Bluetooth headset to the baseunit, you can have a hands-free conversationwirelessly for landline calls.Important:R Your Bluetooth wireless headset mustsupport the HeadSet Profile (HSP)specification.R 1 headset can be paired to the base unit.R Only 2 Bluetooth devices can be used withthe unit at the same time (for example, 2cellular lines, or the headset and 1 cellularline).R For best performance, we recommendusing a Bluetooth headset within 1 m(3.3 feet) of the base unit. A headset cancommunicate with the base unit within arange of approximately 10 m (33 feet).Pairing a headset to the base unitImportant:R Make sure that the Bluetooth headset is notconnected to any other Bluetooth device.1 Your headset:Set your headset to pairing mode.R Refer to the headset operatinginstructions.2 Handset:MMENUN#6213 If your headset PIN is “0000”, go tostep 4.If your headset PIN is other than“0000”, press MCLEARN, then enter yourheadset PIN.R Typically, default PIN is “0000”. Referto the headset operating instructions.4 Press MOKN, then wait until a long beepsounds.5 MOFFNR When is displayed on the baseunit, the headset is available for use.Connecting/disconnecting a headsetIf you cannot connect the headset and baseunit using the headset, you can connect usingthe handset.To use your headset with another Bluetoothdevice such as a cellular phone, you mayneed to disconnect it from the base unit.Important:R Make sure that the headset is turned on.Handset1 To connect/disconnect:MMENUN#622For assistance, please visit http://shop.panasonic.com/support 59Using Bluetooth® Devices