Voice Mail ServiceFor assistance, please visit http://www.panasonic.com/help 37Listening to Voice MailmessagesThe unit lets you know that you havenew Voice Mail messages in thefollowing ways:– “New Voice Mail” is displayed onthe handset.– The message indicator on thehandset flashes slowly if messagealert feature is turned on (page 37).1 Press {C}, then press {VM} within15 seconds.OR{MENU} i{V}/{^}: “V.M.access” i {Select}L The speakerphone turns on.2 Follow the prerecorded instructions.3 When finished, press {OFF}.Note:L If {VM} is not displayed, the VoiceMail access number has not beenstored. Store the number (page 36).L If the handset still indicates there arenew messages even after you havelistened to all new messages, turn itoff by pressing and holding {OFF}until the handset beeps.L If your Voice Mail service uses VoiceMail tones and the message is over 3minutes long, the handset may notindicate new messages.L If your Voice Mail service uses VoiceMail tones, the tones are heard fromany phone connected to the sameline. If you want to use another phoneto listen to Voice Mail messages, youhave to dial your access numbermanually.Message alertYou can select whether or not themessage indicator on the handsetflashes slowly when there are newrecorded messages in the Voice Mailsystem.The default setting is “Off”.Important:L If there are new answering systemmessages present (page 30), themessage indicator also flashesslowly.1 {MENU} i {0}{#}2 {V}/{^}: Select the desired setting.3 {Save} i {OFF}Note:L While message alert is on, batteryoperating time is shortened (page 11).HandsetHandset