Programming21Special programmingAlarmYou can set one of 2 different alarmoptions (once or daily) at a time for eachhandset. An alarm sounds at the set timefor 3 minutes.Important:L Set the date and time beforehand(page 13).1 8 (middle soft key)2 {V}/{^}: “Handset Setup” iM3 {V}/{^}: “Time Settings” iM4 {V}/{^}: “Alarm” i M5 {V}/{^}: Select the desired alarmoption. i M6 Set the desired time. i M7 {V}/{^}: Select the desired alarmtone. i M 2 timesL We recommend selecting adifferent ringer tone to the oneused for outside calls.8 {ih}L When the alarm is set, E isdisplayed.Note:L You can skip to step 4 by pressing{R/E} in standby mode.L To stop the alarm, press any dial keyor place the handset on the base unitor charger.L When the handset is in use, the alarmwill not sound until the handset is instandby mode.L If you select “Once”, the settingchanges to “Off” after the alarmsounds.Selecting area codes to bedeleted automaticallyIn some situations, phone numbersstored automatically in the caller list(page 25) will include area codes. If youdo not want to dial the area codes whenmaking calls from the caller list, you canstore the area codes which you want theunit to delete automatically.Example: You have stored the areacode “123”. If you make a call from thecaller list to the phone number “123-456-7890”, the unit dials “456-7890”.1 8 (middle soft key)2 {V}/{^}: “Base Unit Setup” iM3 {V}/{^}: “Area Code” i M4 Enter an area code (5 digits max.).i M i {ih}Changing the base unit PIN(Personal IdentificationNumber)Important:L If you change the PIN, please makenote of your new PIN. The unit will notreveal the PIN to you. If you forgetyour PIN, contact your nearestPanasonic service centre.“Off”Turns alarm off. Press M again,then press {ih} to exit.“Once”An alarm sounds once at the settime. Enter the desired date andmonth. i ML If you select Arabic as the displaylanguage, enter the desired monthand date.“Daily”An alarm sounds daily at the set time.TG6411-6421BX(e).book Page 21 Monday, April 27, 2009 3:13 PM