Useful Information36Character entryThe dial keys are used to enter characters and numbers. Each dial key has multiplecharacters assigned to it. The characters that can be entered depend on thecharacter entry mode (page 36).– Press {^} or {V} to move the cursor left or right.– Press dial keys to enter characters and numbers.– Press ^ to erase the character or number highlighted by the cursor. Press andhold ^ to erase all characters or numbers.– Press {*} to switch between uppercase and lowercase.– If you do not press any dial key within 5 seconds after entering a character, thecharacter is fixed and the cursor moves to the next space.– When entering another character located on the same dial key, operation will differdepending on the display language you select.EnglishPress {V} to move the cursor to the next space, then press the appropriate dialkey.Arabic/PersianPress {^} to move the cursor to the next space, then press the appropriate dialkey.Character entry modesThe available character entry modes are Alphabet (ABC), Numeric (0-9),Arabic/Persian ( ) and Extended (G). When in these entry modes exceptNumeric, you can select which character is entered by pressing a dial key repeatedly.When the unit displays the character entry screen:/ (right soft key) i {V}/{^}: Select a character entry mode. i MNote:L When you select Arabic or Persian as the display language, numbers in thecharacter table are displayed in Arabic or Persian.Alphabet character table (ABC)Numeric entry table (0-9)TG6411-6421BX(e).book Page 36 Monday, April 27, 2009 3:13 PM