Panasonic KX-TG6451BX Operating Instructions Manual

Also see for KX-TG6451BX: Service manual

Getting started8Note when setting upNote for connectionsL The AC adaptor must remain connected at alltimes. (It is normal for the adaptor to feel warmduring use.)L The AC adaptor should be connected to avertically oriented or floor-mounted AC outlet.Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of the adaptormay cause it to become disconnected.During a power failureThe base unit will work as a standard telephoneusing power from the telephone line, so you canmake and answer outside calls with the cordedhandset. However, this operation may not workproperly depending on area or telephone line’scondition. The base unit speakerphone and thecordless handset will not function during a powerfailure.Note for battery installationL Use the supplied rechargeable batteries. Forreplacement, we recommend using thePanasonic rechargeable batteries noted onpage 3, 4.L Wipe the battery ends (S, T) with a dry cloth.L Avoid touching the battery ends (S, T) or theunit contacts.Note for battery chargeL It is normal for the handset to feel warm duringcharging.L Clean the charge contacts of the handset andcharger with a soft and dry cloth once a month.Clean more often if the unit is exposed togrease, dust, or high humidity.Battery levelPanasonic Ni-MH battery performance(supplied batteries)Note:L It is normal for batteries not to reach full capacityat the initial charge. Maximum batteryperformance is reached after a few completecycles of charge/discharge (use).L Actual battery performance depends on acombination of how often the handset is in useand how often it is not in use (standby).L Even after the handset is fully charged, thehandset can be left on the charger without any illeffect on the batteries.L The battery level may not be displayed correctlyafter you replace the batteries. In this case,place the handset on the charger and let itcharge for at least 7 hours.Icon Battery level& High( Medium) Low0)4 Needs charging.Operation Operating timeIn continuous use 18 hours max.Not in use (standby) 170 hours max.TG6451BX(e).book Page 8 Wednesday, July 8, 2009 10:25 AM