Intercom/Locator382 Wait for the paged party to answer.L If paged party does not answer, press {x}to return to the outside call.3 Proceed with the desired operation.■ To transfer the call:Place the corded handset on the cradle.L The outside call is being routed to thehandset.■ To establish a conference call:Press {3}.L To leave the conference, place the cordedhandset on the cradle. The other partiescan continue the conversation.L To put the outside call on hold, press{a}. To resume the conference, press{3}.1 During an outside call, press 4 to put thecall on hold.L k flashes to indicate the outside call is onhold.2 To page the base unit, press {0}.To page another handset, enter its extensionnumber.3 Wait for the paged party to answer.L If the paged party does not answer, press4 to return to the outside call.4 Proceed with the desired operation.■ To transfer the call:Press {ih}.L The outside call is routed to thedestination unit.■ To establish a conference call:Press {3}.L To leave the conference, press {ih}.The other parties can continue theconversation.Transferring a call without speaking to theother handset or base unit user1 Proceed with the desired operation.■ When 1 handset is registered:During an outside call, press {x}.■ When 2 or more handsets are registered:During an outside call, press {x}.– To page a specific handset, enter thehandset number.– To page all handsets, press {0} or wait fora few seconds.L k flashes to indicate the outside call is onhold.2 Place the corded handset on the cradle.L The outside call rings at the other unit.1 During an outside call, press 4 to put thecall on hold.L k flashes to indicate the outside call is onhold.2 To page the base unit, press {0}.To page another handset, enter its extensionnumber.3 {ih}L The outside call rings at the other unit.Note for base unit and handset:L If the other user does not answer the call within1 minute, the call rings at your unit again.Answering a transferred callLift the corded handset or press {s} to answer thepage.Press {C} to answer the page.Note for base unit and handset:L After the paging party disconnects, you can talkto the outside caller.Y Handset= Base unitY Handset= Base unitY HandsetTG6451_6461FX(e-e).book Page 38 Monday, May 4, 2009 8:55 AM