Panasonic KX-TG6461AL Operating Instructions Manual

Programming24Special programmingAlarmYou can set one of 2 different alarm options (onceor daily) at a time for each handset. An alarmsounds at the set time for 3 minutes.Important:L Set the date and time beforehand (page 13).1 8 (middle soft key)2 {V}/{^}: “Handset Setup” i M3 {V}/{^}: “Time Settings” i M4 {V}/{^}: “Alarm” i M5 {V}/{^}: Select the desired alarm option. iM6 Enter the desired date and month. i M7 Set the desired time. i M8 {V}/{^}: Select the desired alarm tone. iML We recommend selecting a different ringertone to the one used for outside calls.9 M i {ih}L When the alarm is set, E is displayed.Note:L You can skip to step 4 by pressing {R/E} instandby mode.L To stop the alarm, press any dial key or placethe handset on the charger.L When the handset is in use, the alarm will notsound until the handset is in standby mode.L If you select “Once”, the setting changes to“Off” after the alarm sounds.Selecting area codes to be deletedautomaticallyIn some situations, phone numbers storedautomatically in the caller list (page 27) will includearea codes. If you do not want to dial the areacodes when making calls from the caller list, youcan store the area codes which you want the unitto delete automatically.Example: You have stored the area code “123”. Ifyou make a call from the caller list to the phonenumber “123-456-7890”, the unit dials “456-7890”.1 8 (middle soft key)2 {V}/{^}: “Base Unit Setup” i M3 {V}/{^}: “Area Code” i M4 Enter an area code (5 digits max.). i Mi {ih}Changing the base unit PIN (PersonalIdentification Number)Important:L If you change the PIN, please make note of yournew PIN. The unit will not reveal the PIN to you.If you forget your PIN, contact an authorisedservice centre.1 8 (middle soft key)2 {V}/{^}: “Base Unit Setup” i M3 {V}/{^}: “Base Unit PIN” i M4 Enter the current 4-digit base unit PIN (default:“0000”).5 Enter the new 4-digit base unit PIN. i Mi {ih}Incoming call barring (Caller IDsubscribers only)This feature allows the unit to reject calls fromspecified phone numbers that you do not want toanswer such as junk calls.When a call is received, the unit does not ring whilethe caller is being identified. If the phone numbermatches an entry in the call barred list, the unitsends out a busy tone to the caller, and thendisconnects the call.Y Handset“Off”Turns alarm off. Go to step 9.“Once”An alarm sounds once at the set time.“Daily”An alarm sounds daily at the set time. Go tostep 7.Y HandsetY Handset