Panasonic KX-TG6500 Operating Instructions Manual

Also see for KX-TG6500: Installation manual Operating instructions

Contents

Panasonic KX-TG6500 Operating Instructions Manual Manual pdf 16 page image

Installation16Installing the Battery in the HandsetInsert the battery (1), and press it down until it snaps into the compartment (2).Close the cover.To replace the battery:Press the notch on the cover firmly and slide it asindicated by the arrow. Replace the old battery with a newone (p. 17). Close the cover and charge the handset for 6hours.Battery ChargePlace the handsets on the baseunit and charger for 6 hoursbefore initial use.• The unit beeps once, the CHARGEindicator lights and “Charging” isdisplayed.• When the battery is fully charged,“Charge completed” is displayed ifthere are no new calls in the CallerList.Battery strengthYou can confirm the batterystrength on the handsetdisplay.Battery strength is indicatedby the icons shown in thechart to the right.Display prompt Battery strength1 Fully charged2 Medium3 Low(flashing) Needs to be recharged.4 Discharged12CHARGE Indicator(KX-TG6502 only)AND3