Making/Answering Calls16Making calls1 Lift the handset and dial the phonenumber.L To correct a digit, press ^.2 Press {C} or ].3 When you finish talking, press {ic} orplace the handset on the base unit orcharger.Using the speakerphone1 Dial the phone number and press {s}.L Speak alternately with the other party.2 When you finish talking, press {ic}.Note:L For best performance, use thespeakerphone in a quiet environment.L To switch back to the receiver, press{s}/{C}.Adjusting the receiver or speakervolumePress {^} or {V} repeatedly while talking.Making a call using the redial listThe last 10 phone numbers dialled are storedin the redial list (each 24 digits max.).1 j or {>} (R)2 {r}: Select the desired phone number.3 {C}Erasing a number in the redial list1 j or {>} (R)2 {r}: Select the desired phone number.s W3 {r}: “Yes” s M s {ic}Pause (for PBX/long distance serviceusers)A pause is sometimes required when makingcalls using a PBX or long distance service.When storing a calling card access numberand/or PIN in the phonebook, a pause is alsoneeded (page 21).Example: If you need to dial the line accessnumber “0” when making outside calls with aPBX:1 ) s l2 Dial the phone number. s {C}Note:L A 3 second pause is inserted each time lis pressed. Repeat as needed to createlonger pauses.Answering callsWhen a call is being received, the ringerindicator flashes rapidly.1 Lift the handset and press {C} or {s}when the unit rings.L You can also answer the call bypressing any dial key from ) to 9, *,or (. (Any key answer feature)2 When you finish talking, press {ic} orplace the handset on the base unit orcharger.Auto talkYou can answer calls simply by lifting thehandset off the base unit or charger. You donot need to press {C}. To turn this feature on,see page 24.Adjusting the handset ringer volume■ While the handset is ringing for anincoming call:Press {^} or {V} repeatedly to select thedesired volume.■ Programming the volume beforehand:1 8(16)2 {r}: Select the desired volume.3 M s {ic}Temporary handset ringer offWhile the handset is ringing for a call, you canturn the ringer off temporarily by pressing L.TG6611_6621NZ(e).book Page 16 Monday, February 14, 2011 8:43 AM