Multi-unit Operation48IntercomIntercom calls can be made:– between the handset and base unit– between handsetsNote:L If you receive an outside call whiletalking on the intercom, you hear 2 tones(page 35). To answer the call with thehandset, press {LINE1} or {LINE2} thatis flashing on the handset. To answer thecall with the base unit, press {LINE1} or{LINE2} that is flashing on the base unit.L You can locate a misplaced handset bypaging it (handset locator).Making an intercom call1 {INTERCOM}2 To page the base unit, press {0}.To page another handset, enter itsextension number ({1} – {8}).L The destination unit beeps for 1minute.L To stop paging, press {OFF}.3 When you finish talking, press {OFF}.1 {INTERCOM}2 To page a specified handset, enter itsextension number ({1} – {8}).To page all handsets, press {0}.L The destination unit(s) beeps for 1minute.L To stop paging, press {INTERCOM}.L Even if you call all handsets, only thehandset user who answers first cantake the intercom call.3 When you finish talking, press {SP-PHONE}.Answering an intercom call1 Press {C} to answer the page.2 When you finish taking, press {OFF}.1 Press {INTERCOM} to answer thepage.2 When you finish talking, press{INTERCOM}.Note for handset and base unit:L The ringer volume for intercom callsfollows the higher volume level of the 2lines (page 36).L When the ringer volume is set to off forboth lines, the handset or the base unitrings at the low level for intercom calls.HandsetBase unitHandsetBase unit